The distinctive look of traditional hand-made coach house doors in a modern low-maintenance sectional door.

The timeless appeal of timber. The strength and durability of steel.

Insulated Coach House Door

50mm fully insulated garage door
Perfect for garages integral to the house
Durable galvanised steel skins front and back
Robust seals surround the perimeter of the doorto prevent moisture wind and debris form entering the garage
Pinch resistant sections to prevent trapped fingers
Fully tested to comply with the rigorous safety standards of EN 13241 - 1
Security is designed in at every stage with full length vertical guides providing the utmost rigidity and dual locking points for excellent protection against forced entry

Step 1
Print our Survey Sheet

Step 2
Go to your garage and fill in all the fields

Step 3
Choose a size to fit your garage opening.

NOTE: The size you choose refers to the internal frame measurements not to the overall size of the door inclusive of the frame!

For fitting between the reveal, (A & B on the survey sheet), the opening you will need would be:

• The internal frame size plus 140mm extra width and 70mm extra height - this gives you the overall size including the frame. We recommend that you then add 10mm to the width and 5mm to the height to allow tolerance for fitting.
• Backroom = door height plus 203mm for a manual door and plus 990mm for door with electric operation (see bottom section of survey sheet)
  

For fitting behind the reveal, the dimensions you will need would be:

• The door size 
• 70mm of internal side room each side (D & E on the survey sheet)
• 381mm of internal headroom for standard lift and 171mm for low headroom gear (C on the survey sheet)
• Backroom = door height plus 203mm for a manual door and plus 990mm for door with electric operation (see bottom section of survey sheet)