Novoferm Sectional Doors Novoferm Sectional Doors are unsurpassed in quality and style. The sections are manufactured using a heavier guage galvanised steel and fully finished in polyester paint or plastic woodgrain foil.The moving parts tracks and brackets all work harmoniously to ensure a smoothly running door. Ideal for automation these doors can be used manually when fitted with locking - a no cost option.
Features
Sections manfactured from hot dipped galvanised sheet steel double-skin sandwich construction filled with an elastic PUR rigid foam core which is CFC free
Angular frames guide rails and all moving fitting parts on the garage door are also galvanised
The base of the frame legs are stainless steel with free drainage to ensure that rust cannot form on the galvanised frame legs over the long term
High surface stability
Construction provides heat and sound insulation and quiet runnng
Flexible lip seals between the sections prevent heat loss and resists dust and dirt ingress
Wide lip seals on the side frame provide heat insulation and dirt resistance
The frost proof floor seal is a rubber profile made of high quality EPDM (ethylene propylene diene monomer) which is known for itts high elasticity weather resistance and long life-span. This gives optimum protection from water and dirt and evens out slight floor uneveness Safety
Anti-pinch inside and out to ensure that fingers cannot be trapped
Angular frame interference protector and steel ropes arranged inside
Triple safety extension springs (type iso20) and maintenance free torsion springs with tested spring break safety feature (type iso45) in accordance with EN12064 ensure that the door is secured from falling in the unlikely event of spring breakage. Insulation
Type iso20 has 20mm thickness of CFC free PUR rigid foam core (heat insulation value K = 1.0 W/m2 K))
Type iso45 has 45mm thickness of CFC free PUR rigis foam core (heat insulation value K = 0.5 W/m2 K)
Was this product to your satisfaction
iso20 The Premium Garage Door Range
Ideal for single car garages up to 3m (9’10”) in width
Ideal for replacement garage doors due to the special sizes available
Smooth running and stabilty with double-skinned galvanised steel sections
High degree of safety with anti pinch feature inside and out ( according to EN 12604) as well as interference protected triple safety extension springs assemblies with double steel cables
Good heat insulation with 20mm thick CFC PUR rigid foam (heat insulation value K + 1.0 W/m2K)
Outside - Polyester paint traffic white (similar to RAL9016) as standard. At extra cost, the door can be supplied in almost any RAL colour
Inside – Polyester paint grey white (similar to RAL9002)
