Garage Door Systems have taken the Stratford garage door and pre-framed the single door sizes up to 8 feet wide to create the easy to install Vortex Sectional Garage Door. Available as standard without windows the  window options are extensive. With deep fielded georgian panelled sections the Stratford Sectional Garage Door is great choice if insulation is unnecessary.

• Georgian panelled
• Braced single skin sections
• Finger trap protection

Step 1
Print our Survey Sheet

Step 2
Go to your garage and fill in all the fields

Step 3
Choose a size to fit your garage door opening.

NOTE: The size you choose refers to the internal frame measurements not to the overall size of the garage door inclusive of the frame!

For fitting between the reveal, (A & B on the survey sheet), the opening you will need would be:

• The internal frame size plus 140mm extra width and 70mm extra height - this gives you the overall size including the frame. We recommend that you then add 10mm to the width and 5mm to the height to allow tolerance for fitting.
• Backroom = door height plus 203mm for a manual door and plus 990mm for door with electric operation (see bottom section of survey sheet)
  

For fitting behind the reveal, the dimensions you will need would be:

• The door size 
• 70mm of internal side room each side (D & E on the survey sheet)
• 171mm of headroom (C on the survey sheet)
• Backroom = door height plus 203mm for a manual door and plus 990mm for door with electric operation (see bottom section of survey sheet)