This product features in our garage doors Lancashire showroom

The Garador Georgian has deep crisp panel profiles making it a sturdy and solid door with an elegant appearance.  A Garador steel door is designed to provide maximum safety and security.  The Georgian is available in seven different colour options. Whatever colour you choose it is certain to enhance your home.

• Canopy gear available in single door sizes up to 9’ wide
• Mechanism is contained within the frame with no horizontal tracks protruding into the garage
• When the door is open it forms a ‘canopy’ with one third of the door outside the garage
• Anti-drop device to prevent uncontrolled fall of door in the event of spring or cable breakage
• Zinc coated spring on Garador Canopy Type ensures durability and a clean corrosion free look
• Cable drums are cast alloy – not plastic
• Unauthorised entry is prevented by secure 2-point locking
• Handle designed for safe door operation
• See how it works

• Opens along horizontal tracks inside the garage
• Retracts fully back into the garage space when opened
• Ideally suited to automatic electric operation
• Multi spring cassette and pivot arm cover for increased safety
• Parking position in the open position to prevent uncontrolled closing
• Handle designed for safe operation
• Secure locking to prevent forced entry
• Complies with BS 13241
• See how a Retractable Door works

Step 1
Print our Survey Sheet

Step 2
Go to your garage and fill in all the fields

Step 3
Choose a size to fit your garage opening.

NOTE: The size you choose refers to the internal frame measurements not to the overall size of the door inclusive of the frame!

For fitting between the reveal, (A & B on the survey sheet), the dimensions you will need for your Garador Up & Over Garage Door would be:

• The internal frame size plus 140mm extra width for retractable doors, 120mm for canopy type doors, and 50mm extra height for either type - this gives you the overall size including the frame. We recommend that you then add 10mm to the width and 5mm to the height to allow tolerance for fitting.
• Backroom required for Garador retractable garage doors is the opening height minus 50mm and 1236mm backroom for canopy type doors(see bottom section of survey sheet)
  

For fitting behind the reveal, the opening you will need would be:

• The internal frame size plus 10mm of tolerance all round so that the opening is larger than the door.
• 70mm of internal side room each side for retractable doors, and 60mm for canopy type. (D & E on the survey sheet)
• 50mm of internal headroom (C on the survey sheet)
• Backroom required for Garador retractable garage doors is the opening height minus 50mm and 1236mm backroom for canopy type doors (see bottom section of survey sheet)