A combination of natural warmth and beauty with this natural cedar wood from renewable sources. Available fully finished in Sikkens or similar finishing coat system at no extra cost for the popular horizontal timber rib. Choose from the wide range of colour stain finishes to add value and beauty to your home. Pre-framed with a gavanised and painted strong steel outer for neat and simple installation. This Novoferm Up & Over Garage Door has all the usual quality Novoferm features. Importantly; this is a fully retractable garage door - ideal for automation. 

• Pre-hung steel frame with 70mm posts and 55mm headrail
• Available with retractable gear only - ideal for automatic operation
• Brown frame (RAL9016)
• Greater drive through width with "Max Drive Thru" system
• Smooth running with multi spring assisted lifting gear
• Meets current European Product Standard EN 13241-1
• Novoferm Cedar Wood Garages Doors use wood from sustainable sources

Step 1
Print our Survey Sheet

Step 2
Go to your garage and fill in all the fields

Step 3
Choose a size to fit your garage opening.

NOTE: The size you choose refers to the internal frame measurements not to the overall size of the door inclusive of the frame!

For fitting between the reveal, (A & B on the survey sheet), the opening you will need would be:

• The internal frame size plus 140mm extra width and 55mm extra height - this gives you the overall size including the frame. We recommend that you then add 10mm to the width and 5mm to the height to allow tolerance for fitting.
• 1879mm back into the garage for the tracks (see bottom section of survey sheet)
  

For fitting behind the reveal, the opening you will need would be:

• The internal frame size plus 10mm of tolerance all round
• 70mm of internal side room each side (D & E on the survey sheet)
• 55mm of internal headroom (C on the survey sheet)
• 1879mm back into the garage for the tracks (see bottom section of survey sheet)