The cedar wood richness and the stylish elegance of the Thame Garage Door will compliment any home.  Novoferm Cedar is organically grown from replenishable sources. The beauty of the timber with its natural colour and grain variations are a feature. The Thame Up & Over Garage Door comes pre-framed for simple and neat installation. There are nine stain colours with a Sikkens or similar finishing coat system all at a no cost option.  All Novoferm up and over garage doors are retractable making them an ideal choice for remote control operation.

Step 1
Print our Survey Sheet

Step 2
Go to your garage and fill in all the fields

Step 3
Choose a size to fit your garage opening.

NOTE: The size you choose refers to the internal frame measurements not to the overall size of the door inclusive of the frame!

For fitting between the reveal, (A & B on the survey sheet), the opening you will need would be:

• The internal frame size plus 140mm extra width and 55mm extra height - this gives you the overall size including the frame. We recommend that you then add 10mm to the width and 5mm to the height to allow tolerance for fitting.
• 1879mm back into the garage for the tracks (see bottom section of survey sheet)
  

For fitting behind the reveal, the opening you will need would be:

• The internal frame size plus 10mm of tolerance all round
• 70mm of internal side room each side (D & E on the survey sheet)
• 55mm of internal headroom (C on the survey sheet)
• 1879mm back into the garage for the tracks (see bottom section of survey sheet)