The Novoferm Henley Garage Door with its stunning appearance would look well in any traditional or modern home. It has all the beauty and warmth that a timber garage door gives. This garage door is pre-framed in a factory fitted galvanised and polyester paint finished steel frame. This eliminates the need for a timber frame which can rot and warp over time. Installation is simple. This door is fully finished as standard with Sikkens or similar finishing coat system as a no cost option. This is a retractable type up and over garage door which makes it perfect for electric operation by remote control.
Step 1
Print our Survey Sheet
Step 2
Go to your garage and fill in all the fields
Step 3
Choose a size to fit your garage opening.
NOTE: The size you choose refers to the internal frame measurements not to the overall size of the door inclusive of the frame!
For fitting between the reveal, (A & B on the survey sheet), the opening you will need would be:
- The internal frame size plus 140mm extra width and 55mm extra height - this gives you the overall size including the frame. We recommend that you then add 10mm to the width and 5mm to the height to allow tolerance for fitting.
- 1879mm back into the garage for the tracks (see bottom section of survey sheet)
For fitting behind the reveal, the opening you will need would be:
- The internal frame size plus 10mm of tolerance all round
- 70mm of internal side room each side (D & E on the survey sheet)
- 55mm of internal headroom (C on the survey sheet)
- 1879mm back into the garage for the tracks (see bottom section of survey sheet)
