A recent installation of a Garador FGS 700 front doors Lancashire. The Brief We are changing the front entrance of our property in Chorley, Lancashire...
The new Garador FGS 850 brings a touch of the avant garde to the FrontGuard range.
Garador FGS850 Insulation
The Garador FGS 850 has been through the strictest quality tests. These ensured that the door: is air tight under heavy winds and is water tight under heavy rain. They also tested acoustic and thermal insulation, and security. The FGS 850 provides excellent thermal insulation for your home and has a U-value as low as 0.92 W/m2.K.
The 80 mm aluminium frame also has a thermal break with PU foam infill built into its design to further maintain its thermal performance. On the Garador FGS 850, both the door leaf and the frame have extra features designed to reduce heat loss. The low 20 mm aluminium / plastic threshold with thermal break, in conjunction with a durable triple rubber seal on the bottom of the door gives you a reinforced seal that will undoubtedly help to keep your home warm and keep the wind, rain and snow outside.
2 conical swing bolts engage with 2 additional security bolts and 1 lock bolt in the frame’s lock plates and pull the door tightly shut, to make sure you feel safe at home. The lock plate on the FGS 850 door is adjustable for an optimal door setting. It also has a soft lock latch to quietly close the door.
With fully adjustable 3 way hinges, the FGS 850 door can be perfectly adjusted to provide a door that is not only lightweight in operation but seals perfectly.
With the electric strike plate, you can conveniently open your door via a switch inside the house. Alternatively you can also toggle the locking lever so that the entrance door can be opened by a slight push from the outside.
We have a Garador front door on display at our showroom here in Lancashire. We also have a matching sectional garage door. please make the time to come and see these great products. You won’t be disappointed!
- Thermal transmittance of 0.91W/m2k
- Available with RC 2 security
- Low maintenance
Steel door leaf with foam filled core and thermal break, exterior and interior overlapping the leaf, 65 mm thick. Standard polyester primer coating White (RAL 9016) in a smooth finish (inside and out).
Flush fitting door leaf on the interior and exterior of the door, with a leaf frame on the inside and a thick rebate. The flush fit on the interior gives the impression of a residential internal door can be optimally integrated into your house’s interior.
White (RAL 9016) as standard.
Optional colours available:
White Aluminium (RAL 9006), Terra Brown (RAL 8028), Clay Brown (RAL 8003), Ochre Brown (RAL 8001),
Window Grey (RAL 7040), Light Grey (RAL 7035), Anthracite Grey (RAL 7016), Moss Green (RAL 6005),
Ruby Red (RAL 3003), Light Ivory (RAL 1015) and Pigeon Blue (RAL 5014).
Optional surface finishes available:
Foil-coated timber effect in Golden Oak, Dark Oak, Night Oak and foil coated Titan Metallic finish.
4-sided double, black EPDM seals. Brush seal at the bottom, 20 mm high plastic threshold with thermal break.
Locks & bolts
11-point security: 2 conical swing bolts engage with 2 additional security bolts and 1 deadbolt in the frame‘s lock plates.
3 further security bolts on the hinge side and three barrel hinges.
Optional, Traffic white (RAL 9016). Invisible fastening and plastic cover cap at each end.
Three 2-piece 3-way adjustable hinges with hinge caps in aluminium look.
Contemporary and modern designs all have fixed bar handles on the outside and therefore a key is required to open these doors from the outside at all times.
Profile cylinder and keys
Cylinder length with fixed bar handles: 27.5 x 35.5 mm.
Cylinder length with standard lever/lever or lever/knob handle set: 31.5 x 40.5 mm.
Cylinder length with Secured by Design lever/lever or lever/knob handle set: 35.5 x 40.5 mm.
5 keys supplied as standard, 8 or 10 keys available as an option.
Lead time from point of order to installation is approximately 8 – 10 weeks.
Installation available throughout the Northwest